Please note:

This is out OLD Custom-Mold-Configurator. But if you want, you can still use it.... 

You can use our NEW Configurator by clicking here

Custom-mold-Configurator 1.0

This is the CUSTOM-MOLD-CONFIGURATOR. You can choose from different dimensions and properties by ordering a custom-mold. Below the configurator you see an explanation about the dimensions. On bottom of the page you can download the CONFIGURATOR-file for Microsoft EXCEL in case the Online-Tool does not work on your device.


You can type in decimal numbers by using a comma or a point (for example: 33,5 mm or 33.5 mm). Please try both since this depends on your browser which one will work


If you want to order YOUR custom-mold-configuration follow these steps:

  1. make a screenshot of your final configuration
  2. order a CUSTOM-MOLD-KIT or a PRO-MOLD-KIT in our webshop (click here)
  3. send us your configuration-screenshot via email to

You can choose from these dimensions and properties

Length & width

Nose & tail


* height concave measurement is from middle wood to middle wood

distance Wheels

* from middle wheel to middle wheel

(if you are searching for the measurement between the farest truck holes, then you have to add 5,6mm to the distance-wheels-measurement to calculate this by yourself)

outline with/without

You can choose if you want to have the outline included in the mold or not. If not, you can draw it afterwards by hand or using separate templates.


Two different board styles are available. What do you like more: classic- or old-school-boards? Choose it!

Downloading the file:

In case the online tool above on this site does not work on your device, you can load the EXCEL file here.

Microsoft Excel Table 805.1 KB


You can print the excel-sheet in scale 1:1 to get a real good impression how you board will look like.